Low pressure injection molding technology has faster cycles and better parts

     This low-pressure technology has economic advantages: the cycle speed is increased more than traditional injection

molding, the melt pressure is reduced by 25-50% or more, the clamping tonnage is reduced by 50%, and it can mold thinner

walls and increase cavity cavitation without freezing, saving a lot of energy. The quality advantages of low-pressure injection

molding machines include reducing molding stress, filling multi cavity molds more evenly, eliminating flow front hesitation,

and improving part aesthetics.

     Comparison of electronic throttle sensor before and after injection molding

     The low-pressure injection molding process breaks many rules of traditional injection molding. The key is to fill at a constant

lower pressure without relying on shear thinning to promote flow. Filling slower without hesitation will result in faster cycles.

This also allows for colder melts to flow further through thinner channels. Traditional injection molding divides mold filling,

packaging, and cooling into continuous steps, all of which are combined together simultaneously. Can be installed on any

existing molds and machines.

     It can quickly solve various product packaging problems, extend the quality of product use, and avoid the occurrence of

inconsistent and uneven steps at the end of individual products.